Products List
Pliers・stripper
No.1Short Auger Bits
Use
Drilling wood or wooden boards
Features
・Most suitable for drilling a hole in wood or wooden boards.
・Design screw point for fast drilling.
・Design stem for rigidity against bending and accurate clean hole while drilling.
・Single-spur design allows scribing the circumference of the hole in the wood for an inner smooth and beautiful hole.
・6.35mm hex shank for quick change chuck of the impact driver is applicable up to 21mm diameter.
No.1-SStopper Auger Bits (short)（compatible with Impact driver）
Use
Drilling wood.
Features
・Universal screw is two advantages of brad point and screw point for through holes and blind holes.
・Most suitable for adjusting depth.
（Under 21mm diameterHere）
No.1-SStopper Auger Bits (short)（compatible with Impact driver）
Use
Drilling wood.
Features
・Universal screw is two advantages of brad point and screw point for through holes and blind holes.
・Most suitable for adjusting depth.
・6.35 mm hex shank for quick change chuck of the impact driver is applicable up to 21mm diameter.
（Over 21mm diameter Here）
*Please contact us if you need any other size which is not listed.
No.1-TShot Auger Bits Twin
Use
Drilling wood.
Features
・The less tensile force of the screw point designed allows minimum resistance as well as long life of buttery consumption.
・Double spurs allow minimum scribing.
・Double cutting lips and twists help to disperse the amount of chips out for fast, clean holes.
・The obtuse angle provides removal load reduction.
・Design for faster chip ejection and less reduction of the wood chips jam with compositing the spiral flute shape and the straight shape.
・6.35 mm hex shank for quick change chuck of the impact driver.
No.1-VxShort Woodworking Short Auger Bits (compatible with Impact driver）
Use
Drilling wood or wooden boards.
Features
・Most suitable for drilling a hole in wood or wooden boards.
・Design screw point for fast drilling.
・Design stem for rigidity against bending and accurate clean hole while drilling.
・Single-spur design allows scribing the circumference of the hole in the wood for an inner smooth and beautiful hole.
・6.35mm hex shank for quick change chuck of the impact driver is applicable up to 22mm diameter.
（Over 22mm diameter Here）
No.1-VxShort Woodworking Short Auger Bits
Use
Drilling wood or wooden boards.
Features
・Most suitable for drilling a hole in wood or wooden boards.
・Design screw point for fast drilling.
・Design stem for rigidity against bending and accurate clean hole while drilling.
・Single-spur design allows scribing the circumference of the hole in the wood for an inner smooth and beautiful hole.
（Under 22mm diameter Here）
No.1-VxWoodworking Short Bits 2 pcs set
Use
Drilling wood or wooden boards
Features
・Most suitable for drilling a hole in wood or wooden boards.
・Design screw point for fast drilling.
・Design stem for rigidity against bending and accurate clean hole while drilling.
・Single-spur design allows scribing the circumference of the hole in the wood for an inner smooth and beautiful hole.
・6.35mm hex shank for quick change chuck of th
No.2Standard Auger Bits
Use
Drilling wood
Features
・Most suitable for drilling a hole in a pole or a timber.
・Design screw point for fast drilling.
・Design stem for rigidity against bending and accurate clean hole while drilling.
・Single-spur design allows scribing the circumference of the hole in the wood for an inner smooth and beautiful hole.
・6.35 mm hex shank for quick change chuck of the impact driver is applicable up to 21mm diameter.
（Over 21mm diameter Here）
No.2Standard Auger Bits（compatible with Impact driver）
Use
Drilling wood
Features
・Most suitable for drilling a hole in a pole or a timber.
・Design screw point for fast drilling.
・Design stem for rigidity against bending and accurate clean hole while drilling.
・Single-spur design allows scribing the circumference of the hole in the wood for an inner smooth and beautiful hole.
・6.35 mm hex shank for quick change chuck of the impact driver is applicable up to 21mm diameter.
No.3Long Auger Bits
Use
Drilling wood.
Features
・The long twist is ideal for drilling a deep hole.
・Design screw point for fast drilling.
・Design stem for rigidity against bending and accurate clean hole while drilling.
・Single-spur design allows scribing the circumference of the hole in the wood for an inner smooth and beautiful hole.
No.5Short Twist Ring Auger Bits with Handle
Use
Drilling wood.
Features
・No required electricity, due to its manual handle..
・Ring design for insert the included wooden stick.
No.7Extra Long Auger Bits
Use
Drilling wood.
Features
・Most suitable to drill a deep hole.
・Design stem for rigidity against bending and accurate clean hole while drilling.
No.7-ESuper Long Auger Bits
Use
Drilling wood.
Features
・Most suitable to drill a deep hole.
・Design stem for rigidity against bending and accurate clean hole while drilling.
No.9Mini Bits
Use
Drilling wood.
Features
・Pen Impact Driver (Over 7.2 V)
・Impact Driver (Over 12 V)
・Drill Driver (Over 12V)
No.10Long Scale Auger Bits
Use
Drilling wood.
Features
・Interval 30mm marks allow checking drill depth.
・Designed screw pint for fast drilling.
・Interval marks 30mm helps you to measure drill depth.
・6.35mm hex shank for quick change chuck of the impact driver.
No.11Lock Board Bits
Use
Drilling wood.
Features
・Most suitable for work on drilling a hole for the fitting door lock.
・Short bit for outstanding usability.
No.12Nail Cutter Ship Auger Bits (2×4 wood frame construction)
Use
Drilling wood in 2x4 wood frame construction
Features
・Cutting through nail-embedded wood.
・Design superior special surface coating for smooth ejecting chip and less resistance.
・Design Self-feed screw point for fast drilling.
・Design stem for rigidity against bending, wobbling and accurate clean hole while drilling.
・Design sharpen rake angle allows for smooth scoop chip up.
・Cutting lips makes it easy to resharpen.
Precautions for Use
Please be careful when you hit nails.
Please wear safety goggles, gloves and other appropriate safety items for protections.
No.12-LNail Cutter Long Ship Auger Bits (2×4 wood frame construction)
Use
Drilling wood in 2x4 wood frame construction
Features
・Most suitable to drill a deep hole.
・Cutting through nail-embedded wood.
・Design superior special surface coating for smooth ejecting chip and less resistance.
・Design Self-feed screw point for fast drilling.
・Design stem for rigidity against bending, wobbling, and accurate clean hole while drilling.
・Design sharpen rake angle allows for smooth scoop chip up.
・Cutting lips makes it easy to resharpen.
No.18Plywood Auger Bits Stopper Type (Centring work)
Use
Drilling in plywood with centring work.
Features
・Most suitable length for penetrating two-ply 12mm/15mm wood board.
・Suitable for fixed-depth holes
・The stopper allows stopping the advance of the drill and extra rotation shortly, thus the battery lasts longer and more holes can be drilled with one charge.
・Design a groove shape of more than half a circle for smooth rotation, save battery by easy removal from hole without wobbling.
No.18-EPlywood Auger Bits Straight Type (Centring work)
Use
Drilling in plywood with centring work.
Features
Design drilling a hole of up to 55mm without a stopper.
No.18-VxPlywood Auger Bits (Centring work) 3pcs set
Use
Drilling in plywood with centring work.
Features
・Most suitable length for penetrating two-ply 12mm/15mm wood board.
・Suitable for fixed-depth holes.
・The stopper allows stopping the advance of the drill and extra rotation shortly, thus the battery lasts longer and more holes can be drilled with one charge.
・Design a groove shape of more than half a circle for smooth rotation, save battery by easy removal from hole without wobbling.
No.20Hex Shank Iron Drill Bits
Use
Drilling iron, wood, aluminum, acryl board
Features
・Design Hex shank for quick change of impact drill.
・Design X style thinning at the tip for great chip discharge at the drill tip and prolong battery life.
・Inserted the pin to prevent rotation or slipping out.
No.20Hex Shank Iron Drill Bits 5 pcs set
Use
Drilling iron, wood, aluminum, acryl board
Features
・Design Hex shank for quick change of impact drill.
・Design X style thinning at the tip for great chip discharge at the drill tip and prolong battery life.
・Inserted the pin to prevent rotation or slipping out.
No.20-EHex Shank Integrated Iron Drill Bits
Use
Drilling iron, wood, aluminum, acryl board
Features
・Design hex shank for quick change of impact drill.
・Allows you to help drilling on material easily as a steel drill.
・Design X style thinning at the tip for great chip discharge at the drill tip and prolong battery life.
・Less runout and drilling a hole accurately due to integrated processing.
・Centre punch is unnecessary.
・edge of blade lacks any centre runout.
No.20-LHex Shank Long Iron Drill Bit
Use
Drilling iron, wood, aluminum, acryl board.
Features
・Design Hex shank for quick change of impact drill.
・Design X style thinning at the tip for great chip discharge at the drill tip and prolong battery life.
・Design for a long flute length is ideal for drilling a deep hole.
・Inserted the pin to prevent rotation or slipping out.
No.22Hex Shank Dowel Bits
Use
Drilling wood for a dowel hole.
Features
・Design short effective length for the specialised dowel hole.
・The stopper will support reducing extra rotation and keeping battery life and makes many holes with one charge.
・Design having a stopper for making a certain depth hole.
No.21HSS Tapered Auger Bits
Use
Drilling a pre-hole for a wood screw or nail.
Features
・Most suitable for work to stop on softwood.
・Design tapered style bit for secure fitting of wood screw or nail.
・Using high-speed steel for long life with reduced drilling resistance.
・6.35 mm hex shank for quick change chuck of the impact driver.
・Inserted the pin to prevent rotation or slipping out.
No.22-DWooden Dowel Pins
Use
For a joint system for joining another working material or a blind nail system.
Features
One point advice
Please use it with our brand of hex shank dowel bit. If you use another brand of hex shank dowel gimlet, the dowel marker may not fit correctly the hole size.
No.23Hex Shank Drill Cutter （L-15㎜）
Use
Drilling a prepared hole as well as chamfering on steel, wood and aluminium.
Features
・Design hex shank for quick change of impact drill.
・Using high-speed steel for Long life with reduced drilling resistance.
・Design X style thinning at the tip for great chip discharge at the drill tip and prolong battery life.
・Due to designed combining inner drill and chamfering cutter, be able to do for drilling pre hole and 90-degree chamfering in one process.
・Replacement inner drill offered and rechanged by an L-style wrench simply.
No.22-MDowel Marker
Use
Mark for drilling a dowel hole.
Features
・Most suitable to use for a particular location which wanted to drill a hole.
・Able to be easy and smooth to drilling a hole.
No.23Hex Shank Drill Cutter（L-30㎜）
Use
Drilling a prepared hole as well as chamfering on steel, wood and aluminium.
Features
・Design hex shank for quick change of impact drill.
・Using high-speed steel for Long life with reduced drilling resistance.
・Design X style thinning at the tip for great chip discharge at the drill tip and prolong battery life.
・Due to designed combining inner drill and chamfering cutter, be able to do for drilling pre hole and 90-degree chamfering in one process.
・Replacement inner drill offered and rechanged by an L-style wrench simply.
No.23Inner Drill（L-15㎜）
Use
Drilling a prepared hole as well as chamfering on steel, wood and aluminium.
Features
・Using high-speed steel for Long life with reduced drilling resistance.
・Replacement inner drill offered and rechanged by an L-style wrench simply.
・Design X style thinning at the tip for great chip discharge at the drill tip and prolong battery life.
No.23Inner Drill（L-30㎜）
Use
Drilling a prepared hole as well as chamfering on steel, wood and aluminium.
Features
・Using high-speed steel for Long life with reduced drilling resistance.
・Replacement inner drill offered and rechanged by an L-style wrench simply.
・Design X style thinning at the tip for great chip discharge at the drill tip and prolong battery life.
No.24Hex Shank Concrete Drill Bits
Use
Drilling concrete, block, mortar, gypsum board.
Features
・Design Hex shank for quick change of impact drill.
・Suitable in drilling a pre hole for a plug anchor or no plug screw.
・Design polished tip drill for improving cutting quality.
・the shank and drill body has adhered completely.
・Inserted the pin to prevent rotation or slipping out.
No.24Hex Shank Integrated Concrete Drill Bits
Use
Drilling concrete, block, mortar, gypsum board.
Features
・Design Hex shank for quick change of impact drill.
・Suitable in drilling a prepared hole for a plug anchor or no plug screw.
・Design polished tip drill for improving cutting quality.
・the shank and drill body has adhered completely.
・Inserted the pin to prevent rotation or slipping out.
No.25SDS Shank Wood Auger Bits
Use
Drilling wood.
Features
・Design SDS Shank for a quick change for the rotary hammer drill (SDS plus shank).
SDS plus 1696
SDS bit are manufacturing and selling with licensing agreement with BOSCH (Germany).
No.26Hex Shank Stainless Steel Drill Bits
Use
Drilling on iron or stainless steel.
Features
・Design Hex shank for quick change of impact drill.
・Using Cobalt High-Speed Steel Drill for grinding resistance of drills.
・Design short flute length for improving accuracy, efficiency and rigidity.
・Design X style thinning at the tip for great chip discharge at the drill tip and prolong battery life.
・the shank and drill body has adhered completely
・Inserted the pin to prevent rotation or slipping out.
・Design 135-degree tip angle for drilling on stainless steel.
No.27SDS Shank Iron Drill Bits
Use
Drilling on stainless steel, steel and copper.
Features
・Design SDS Shank for a quick change for lightweight hammer drill (SDS plus shank).
・Using Cobalt High-Speed Steel Drill for grinding resistance of drills. (Drill Blade NACHI steel).
・Design X style thinning at the tip for great chip discharge at the drill tip and prolong battery life.
・Tip angle of drill has 135 degree for drilling a hole on stainless steel.
Material:
Cobalt High Speed steel (Co HSS)
SDS plus 1696
SDS bit are manufacturing and selling with licensing agreement with BOSCH (Germany).
No.28-SHex Shank Spiral Taps (through hole, blind hole) (Whitworth standard)
Use
Making screw threads and fixing broken screw threads.
Features
・Able to install in forward-reverse rotation such as impact drivers, and process a screw hole smoothly.
・Cutting chips are discharged upwards duty to the spiral.
No.28-SHex Shank Spiral Taps (through hole, blind hole) (Metric standard)
Use
Making screw threads and fixing broken screw threads.
Features
・Able to install in forward-reverse rotation such as impact drivers, and process a screw hole smoothly.
・Cutting chips are discharged upwards duty to the spiral.
No.28-TComposite shank taps (Through hole)
Use
Making screw threads and fixing broken screw threads.
Features
・Greatly save processing steps and time costs, improve working efficiency.
The conventional tap shank shapes are divided into two types: “square shape” and “hexagonal shape”. Therefore, the tools that can be used safely were decided, and depending on the work, it was necessary to have two tools. In order to improve that part, this product is made to collaborate with the two types of shaft shapes so that one tool can handle all tools.
No.28-LHex Shank Spiral Taps Long Type (Through hole, blind hole)
Use
Making screw threads and fixing broken screw threads.
Features
・Able to drill a blind hole or a screw hole with discharging the filings upward through the spiral flute.
・Most suitable to use this tap in narrow places or the far edges of the working material.
・Cutting chips are discharged upwards duty to the spiral.
・6.35 hex shank for quick change chuck.
Material:
High Speed Steel -HSS
Precautions for Use
Please do not use any other electric tool with forward-reverse rotation.
Please be sure to use tapping oil.
No.28-PHex Shank Stainless Steel Point Taps (Through hole)
Use
Making screw threads and fixing broken screw threads.
Features
・Able to install in forward and reverse rotation such as impact drivers, and process screw hole smoothly.
・Chips inside the work material are discharged forward.
・Durability is improved due to titanium coating, also can be used on Stainless Steel.
・6.35 hex shank for quick change chuck.
Material:
High Speed Steel -HSS
Precautions for Use
Please do not use any other electric tool with forward-reverse rotation.
Please be sure to use tapping oil.
No.29Hex Shank Dies Holder
Use
Fixing screw cutter of bolts or broken screw thread of bolts.
Features
It attaches to models with forward and reverse rotation such as impact drivers, it allows you to help to fix easily when it happens to cut bolts and break threads.
No.30Hex Shank Porcelain Tile Drill Bits
Use
Drilling holes in porcelain tile, block, mortar, gypsum board, interior wall tiles and roof tiles.
Features
・Design hex shank for quick change of impact drill.
・Suitable in drilling a prepared hole for a plug anchor or no plug screw.
・Inserted the pin to prevent rotation or slipping out.
・Designed special head shape.
No.31Mushroom Bits (High Speed Lead Type) Sawdust Spawn
Use
Features
・Improved work efficiency with strength of high-speed rotation.
No.31Mushroom Bits (High Speed Lead Type) Thimble spawn
Use
Features
・Improved work efficiency with strength of high-speed rotation.
No.32Mushroom Bits (High Speed Crescentic Type) Sawdust Spawn
Use
Features
・Allows you to improved work efficiency with good excreting wood tips by crescentic shape.
No.32Mushroom Bits (High Speed Crescentic Type) Thimble spawn
Use
Features
・Allows you to improved work efficiency with good excreting wood tips by crescentic shape.
No.33Mushroom Bits with Stopper Sawdust Spawn
Use
Features
・The stopper does not keep drilling further when it touches certain depth, as to not damage on crude wood.
・There are two types of depth available with changing the position of the stopper.
No.33Mushroom Bits with Stopper Thimble spawn
Use
Features
・The stopper does not keep drilling further when it touches certain depth, as to not damage on crude wood.
・There are two types of depth available with changing the position of stopper.
No.34Hex Shank Mushroom Bits with Stopper Thimble spawn
Use
Features
・Able to use rechargeable electric power tool or 6.35 Hex Shank for quick change chuck of the impact driver.
・The same depth of the hole and increase work efficiency with a stopper function.
No.35Mushroom Bits (Ultra-High-Speed Lead Bit) Thimble spawn
Use
Features
・Has outstanding endurance.
No.35Mushroom Bits (Ultra-High-Speed Lead Type) Sawdust Spawn
Use
Features
・Has outstanding endurance.
No.36Mushroom Hammer Special spare blade
Use
・Able to drill a hole depth from 8.5mm to 9.5mm. (Tapered blade)
Features
No.36Mushroom Hammer
Use
Features
・Working outside with no power.
・Able to drill a hole depth from 8.5mm to 9.5mm.
・Design replaceable head Blade.
No.50Hex Shank Tapping Drill (Through hole)
Use
・Making screw threads.
Features
・Greatly save processing steps and time costs, improve working efficiency due to drill tap and countersink in one step.
・Has outstanding cutting quality due to the X-type thinning process providing good filing discharge at cutting edge.
・6.35 hex shank for quick change chuck.
No.51Hex Shank Siding Drill Bit
Use
・Drilling ceramic sliding boards, block, mortar, brick and Autoclaved Lightweight Concrete panels (ALC)
Features
・Design Hex shank for quick change of impact drill.
・Design short length for durable and ideal deal.
No.100Kotenoko 135 Hand saw
Use
Cutting of protruding blank.
Features
・Designed no kerf for no damage on the cutting surface.
・The handle is above the saw blade for closing your body and wood and support to be able to easy to work and make a good finish on the cutting surface.
・Firmly fixed between the saw blade and handle by glue.
・Coated with nickel plating, preventing rust.
No.150MINI Crimping Pliers for small open barrel
Use
wiring work at automobile wiring, mechanical wiring, electrical equipment wiring
Features
Designed work reliably and efficiently by using special material and Precise machining and induction heat treatment maximum insourcing.
No.200-SCrimping Pliers for non-insulated solderless terminal
Use
wiring work at automobile wiring, mechanical wiring, electrical equipment wiring
Features
Designed work reliably and efficiently by using special material and Precise machining and induction heat treatment maximum insourcing.
No.200Crimping Pliers for insulated solderless terminal
Use
wiring work at automobile wiring, mechanical wiring, electrical equipment wiring
Features
Designed work reliably and efficiently by using special material and Precise machining and induction heat treatment maximum insourcing.
No.210Crimping Pliers for insulated solderless terminal
Use
wiring work at automobile wiring, mechanical wiring, electrical equipment wiring
Features
Designed work reliably and efficiently by using special material and Precise machining and induction heat treatment maximum insourcing.
No.210-CCrimping Pliers for open barrel type terminal
Use
wiring work at automobile wiring, mechanical wiring, electrical equipment wiring
Features
Designed work reliably and efficiently by using special material and Precise machining and induction heat treatment maximum insourcing.
No.220Crimping Pliers for both insulated and non-insulated solderless terminal
Use
wiring work at automobile wiring, mechanical wiring, electrical equipment wiring
Features
Designed work reliably and efficiently by using special material and Precise machining and induction heat treatment maximum insourcing.
No.220-CCrimping Pliers for both insulated and open barrel type terminal
Use
wiring work at automobile wiring, mechanical wiring, electrical equipment wiring
Features
Designed work reliably and efficiently by using special material and Precise machining and induction heat treatment maximum insourcing.
No.300-CCrimping Pliers for open barrel type and non-insulated terminal
Use
wiring work at automobile wiring, mechanical wiring, electrical equipment wiring
Features
Designed work reliably and efficiently by using special material and Precise machining and induction heat treatment maximum insourcing.
No.300-NCrimping Pliers for both non-insulated and open barrel type terminal
Use
wiring work at automobile wiring, mechanical wiring, electrical equipment wiring
Features
Designed work reliably and efficiently by using special material and Precise machining and induction heat treatment maximum insourcing.
No.SP-1AWire Stripper for Thin wire
Use
wiring work at automobile wiring, mechanical wiring, electrical equipment wiring
Features
Designed work reliably and efficiently by using special material and Precise machining and induction heat treatment maximum insourcing.
No.SP-2AWire Stripper for Thick wire
Use
wiring work at automobile wiring, mechanical wiring, electrical equipment wiring
Features
Designed work reliably and efficiently by using special material and Precise machining and induction heat treatment maximum insourcing.
No.Centre Bits
Use
Drilling wood.
Features
・Designed having brad point for drilling wood a blind hole.
・Designed sharpened and hardened blades for a fast cuts with large diameters.
No.Middle Size Bits
Use
Drilling wood.
Features
・Most suitable for drilling squired timber.
・φ12mm bit has strengthened screw point.
No.Special Rail Road Bimetal Bits
Use
・Drilling Hardwood. ・Drilling laminated wood ・Drilling Fiber-Reinforced Foamed Urethane (FFU) synthetic sleeper.
Features
・ Welded high-speed steel at the drill head for superior durability with reduced drilling resistance.
No.Bell Hanger Bits
Use
Drilling wood for wire electrical equipment pulling through walls, ceilings, and floors.
Features
Designed tapered flute for faster chip ejection, and less reduction of the wood chips jam.